Loading module…
V-WIRE // SPEC_001
Industrial
Interconnect.
High-reliability OEM cable assembly platform. Engineered for extreme performance in robotics, aerospace, EV, and industrial automation.
Lead time48H proto
ComplianceIPC/620 C3
First-pass yield99.7%
Time-zone span24h reply
Procurement Friction · ANALYSIS_002
Where most cable programs slip.
PAIN-0101
Quote latency
RFQ turnarounds slip from 48h target to two weeks across most Tier-2 shops.
PAIN-0202
Spec drift
Connector substitutions made at the bench without engineering sign-off — found on first field failure.
PAIN-0303
MOQ tax
Suppliers refusing 5-unit pilot runs or charging 10× per unit until you commit to 5K.
PAIN-0404
Black-box build
No traceability on which wire lot or operator touched the harness that failed in the field.
Founded2003
Engineers + operators500+
Markets shipped32 countries
First-pass yield99.7%
Prototype cycle48 hours
Min order1 unit
Cost Transparency
A Fully Itemized Cost Breakdown With Every Quote
Most suppliers hand you a single lump-sum price. We give you a complete, line-by-line breakdown — so you know the cost of every component and every process step before you commit.
- Line-by-line costing for every wire, terminal, connector and process step — material and labour itemized separately.
- No hidden mark-ups: you see exactly how your quote is built and where every cent goes.
- Makes internal budget approval and supplier cost benchmarking effortless.
Cap_ArchitecturesEngineering
Engineering
Protocols.
[SYS_STATE: READY]
[LOC: SHIJIAZHUANG.CN · CAVITE.PH]
[LOC: SHIJIAZHUANG.CN · CAVITE.PH]
RP-0101
Rapid Prototyping
Validation-ready harnesses in under 48 hours.
Open spec DFM-0202DFM Optimization
Design analysis for yield, cost, and tolerance margin.
Open spec MW-0303Custom Micro-Wiring
High-density interconnects down to AWG 32.
Open spec QA-0404Automated Screening
CIRRIS 1000H continuity + hipot verification.
Open spec SCM-0505Sourcing Logistics
End-to-end component lifecycle management.
Open spec STD-0606IPC-620 Class 3
Mission-critical workmanship by certified operators.
Open specIndustry_SegmentsCritical
Critical
Hardware.
Engineered interconnect for the frontier of physical technology.
FAB_PROTOCOLFabrication
Fabrication
Cycle.
01
DFM ANALYTICS
Collaborative review of topological schematics, BOM rationalization, tolerance audit.
02
CLASS-3 ASSEMBLY
Precision bench-work under IPC/WHMA-A-620 Class 3 — torque-controlled crimping, ESD-safe fixtures.
03
DIGITAL TRACE
ERP-integrated lot tracking — every connector, splice, and operator timestamp logged.
04
ENVIRONMENTAL TEST
CIRRIS continuity, hipot, pull-force, ±10% calibrated. IP67/68 chambers on demand.
[VIEW__ST_04]
[LAT_38.04 / LNG_114.51]
Audit Trail · COMPLIANCE_005Verified by audit,
Verified by audit,
not by claim.
Click any certificate to view the full PDF. Standards independently audited by SGS, TÜV, and BSI. Compliance pack available under NDA.
FAQ · INTAKE_QUERIESProcurement
Procurement
questions, answered.
What is your minimum order quantity?+
Prototype and engineering validation builds start at 1 unit. Production runs typically start at 50 units. There is no enforced floor for NPI work — bring us a single drawing and we will quote against it.
How fast can you ship a working prototype?+
Standard prototype lead time is 48 hours from approved drawings for IPC/WHMA-A-620 Class 2. Class 3 prototypes ship in 72 to 96 hours depending on connector availability. RFQ → quote turnaround is 24 hours or less.
Which connector and wire families do you stock?+
Molex MX150, Mini-Fit, Pico-Blade; JST GH/SH/ZH/PH; TE AMP, Deutsch DTM/DT/DTP; Amphenol RJF/AT; Hirose DF-series. Wire stock covers UL 1007/1015/1061/3266, AWG 32 down to AWG 4, plus PTFE, silicone, and FEP for high-temp builds.
Do you handle full overmolded and IP67/IP68 cable assemblies?+
Yes — low-pressure polyurethane and high-temp thermoplastic overmolds for sealed connectors. IP67/IP68 validated by water-immersion bench, pull-force qualification per UL 758.
Where are you located and where do you ship from?+
Engineering and tooling in Shijiazhuang, China. Production split between Shijiazhuang and Cavite Economic Zone, Philippines (tariff-advantaged for US-bound orders). US sales presence in Gary, Indiana for North American customer support.
What payment and logistics options are available?+
PayPal and TT bank transfer up to USD 50,000. NET-30 with verified credit. Letter of Credit available for orders above USD 100,000. DHL, FedEx Priority, UPS, and sea freight by Incoterms 2020 (EXW, FOB, DDP, CIF).
ENGAGE · CTA_002Talk to an
Talk to an
engineer.
Send drawings, BOM, or a rough concept. We respond within 4 business hours — no obligation, NDA on request.
QA Bench / Continuity & Pull-force / IPC/620 Class 3 / Operator-traced